PAGE 5 - FX: A EDITING
This page contains the editing parameters for the A effect
(usually, reverb for Sequencer 1).
Use the E-F and G-H VOLUME/VALUE button pairs to scroll
the parameter list.
Use the A-D VOLUMME/VALUE button pairs to select and
edit a parameter.
Use the TEMPO/VALUE controls to edit the selected param-
eter.
Note: When playing back a Song that makes use of all four
effects (A-D), you can’t edit any effect parameter. These param-
eters appear greyed out in the display.
Note: When you stop the Song, or select a different Song, the
default effects are selected again. You can, however, stop the
Song, change the effects, then start the Song again. Edit the Song
in Song mode to permanently change the effects.
Parameters
See “Effects” on page 20-1 for a list of available parameters
for each effect type.
PAGE 6 - FX: B EDITING
This page contains the editing parameters for the B effect
(usually modulating effect for Sequencer 1). For more details,
see “Page 5 - FX: A editing” above.
PAGE 5 - FX: C EDITING
This page contains the editing parameters for the C effect.
You can access this page only when the “S2 FX Mode” param-
eter is set to C/D (see “S2 FX Mode” on page 11-11). For
more details, see “Page 5 - FX: A editing” above.
Note: C and D effects are used also by the Realtime (Keyboard)
tracks.
PAGE 6 - FX: D EDITING
This page contains the editing parameters for the D effect.
You can access this page only when the “S2 FX Mode” param-
eter is set to C/D (see “S2 FX Mode” on page 11-11). For
more details, see “Page 5 - FX: A editing” above.
Note: C and D effects are used also by the Realtime (Keyboard)
tracks.
PAGE 7 - TRACK: MODE
This page lets you set the polyphony mode for each Song
track.
Use the TRACK SELECT button to switch from tracks 1-8 to
tracks 9-16.
Parameters
Drum This is a Drum/Percussion track. No Master or
Octave Transpose applies to this track.
Poly Tracks of this kind are polyphonic, i.e. they can
play more than one note at the same time.
Mono Tracks of this kind are monophonic, i.e. each
new note stops the previous note.
Mono Right A Mono track, but with priority assigned to
the rightmost (highest) note.
PAGE 8 - TRACK: INTERNAL/EXTERNAL
This page lets you set the Internal or External status for each
track. It is very useful to let a Song track drive an external
expander.
Use the TRACK SELECT button to switch from tracks 1-8 to
tracks 9-16.
Rev Time [sec]: 3.07 |
High Damp [%]:0
Pre Dly [ms]:0
Pre Dly Thru [%]:0 |
FX:A Edit
Poly Poly
Poly Poly
Poly Poly
Poly Poly
Track:Mode
Poly Mono Right
Drum Poly
Drum Poly
Poly Poly
Track:Mode
Internal Internal
Internal Internal
Internal External
Internal Internal
Track:Int/Ext
Internal Internal
Internal Internal
Internal External
Internal Internal
Track:Int/Ext
To Next Page
Loading...
Need help?
General
