SELECTING A PROGRAM
You can select a different Program (i.e., sound) to be played
by a track. Before selecting a Program, you must select the
track you want to assign the Program to.
Note: To assign different Programs to the Style tracks, press
TRACK SELECT to see the Style tracks. If you select a Program
while grouped tracks (Drum/Percussion or ACC) are selected,
the Program will be assigned to the last selected track.
Each Style Element (Variations, Fills…) can have different
Programs, so your selection might be automatically reset
when selecting a different Element. To avoid this reset, see
“Prog (Program)” on page 9-11.
1. Use the VOLUME/VALUE (E-H) buttons on the right
side of the display, to select the Realtime (Keyboard)
track you wish to assign a different Program to.
2. Press the PROGRAM button. This changes the PRO-
GRAM/PERFORMANCE section into a Program selec-
tor.
3. Use the leftmost PROGRAM/PERFORMANCE button
to select a row of Program banks (upper, lower, CARD).
4. Select the PROGRAM/PERFORMANCE bank contain-
ing the Program you are looking for (Program banks are
identified by instrument names).
The Program Select window appears. See “Programs
(Program Change order)” on page 19-11 for a list of
Factory Programs.
5. Browse all the Programs in the selected bank using the
PAGE buttons. There can be various pages for each
bank, containing up to 8 Programs each.
6. As you find the Program you are looking for, select it
using the VOLUME/VALUE (A-H) buttons.
7. If the DISPLAY HOLD LED is on, press EXIT to exit this
window.
SELECTING AND USING THE DIGITAL
DRAWBARS
The Pa80 includes a realistic simulation of the classic rock
organs. You can select these special Programs by pressing the
DIGITAL DRAWBARS button. Unlike other Programs, the
Digital Drawbars follow different rules.
• In Style Play and Backing Sequence mode, only a Digital
Drawbar Program is available for the Realtime tracks,
and one for the Style tracks. Save them into a Perfor-
mance (see “The Write window” on page 9-4).
• In Song Play mode, there is a Digital Drawbar Program
for the Realtime tracks, one for Song tracks 1-8, another
one for Song tracks 9-16.
• In Song mode there is a Digital Drawbar Program for
Song tracks 1-8, one for Song tracks 9-16.
1. Use the VOLUME/VALUE (E-H) buttons on the right
side of the display, to select the Realtime (Keyboard)
track you wish to assign a different Program to.
2. Press the PROGRAM button. This changes the PRO-
GRAM/PERFORMANCE section into a Program selec-
tor.
3. Use the leftmost PROGRAM/PERFORMANCE button
to select the first row of Program banks.
Drum/Perc Piano01
Bass01 Guitar01
Acc.1-5 StrngEns2
Audio In VoxPad1
BossaNova |STS1
A
B
C
D
To Next Page
Loading...
Need help?
General
