KTM 2014 690 SMC R EU - Page 31

7 HANDLEBAR, CONTROLS 29
G00779-10
–
Remove screws

. Take off the side cover.
G00781-10
– Remove the cable binder.
G00780-10
–
Remove screw

.
– Push the trim aside.
G00782-10
–
Disconnect plug-in connector

.
– Expose the cable of the accelerator position sensor.
G00783-10
–
Remove screws

.
– Take the combination instrument up out of the holder and hang to the side.
G00784-10
–
Loosen screw

.