Kurzweil K2000 - GUIDE SUPPLEMENT - VERSION 3 User Manual

4-50
Disk Mode Enhancements in Version 3
Macros
Pressing OK will set all of the selected macro entries to have drive ID or Bank and Mode settings
according to the parameters set up on this page. The display will return to the MACRO page
with the same entries still selected. Any modifications to the parameters will be visibly
apparent.
Press Delete to remove the macro entries from the macro list. You will see the display:
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
Delete|macro|entries?|||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
|||||||||||||||||||||||||||||Yes||||No||
If you answer Yes, the display returns to the MACRO page and all of the previously selected
entries will be gone from the list. If you answer No, the display will return to the Modify Macro
Entries dialog.
Pressing Cancel in the Modify Macro Entries dialog will return to the MACRO page with
everything that was selected still selected, but with no parameter changes made to any macro
entries.
Here are the parameter values for Modify Macro Entries:
Once you have made the necessary changes to the in-memory macro, you can go to the Save
Macro page to write selected (or all) entries to a new disk file (or replace over the original macro
file you may have loaded in for editing.)
You can load any group of files listed in the in-memory macro. This is done using the Load soft
button on the MACRO page:
Func:MACRO||||[Record]|||||||Index:|||1|
||||||||||||||||||||||||||||||||||||||||
||||||||||||||||||||||||||||||||||||||||
|1:\STRINGS.KRZ||||||||||||||||200:F:|||
*1:\PIANO.KRZ||||||||||||||||||300:F:|||
|1:\DRUMS.KRZ||||||||||||||||||400:F:|||
*1:\NOISE.AIF||||||||||||||||||500:F:|||
Select|Modify||Load||Pause|||Off|||Exit|
Parameter Values
Modify Drive, Bank/Mode
Drive
Floppy, SCSI 0, SCSI 1, SCSI 2, SCSI 3, SCSI 4, SCSI 5, SCSI 6, SCSI 7,
Unspecified, Library
Bank 000's, 100's, 200's, 300's, 400's, 500's, 600's, 700's, 800's, 900's, Everything
Mode Append, Merge, Fill, Overwrite, OvFill

Kurzweil K2000 - GUIDE SUPPLEMENT - VERSION 3 Specifications

General

Synthesis Type	VAST (Variable Architecture Synthesis Technology)
Polyphony	24 voices
Category	Synthesizer
Model	K2000
Document Type	Guide Supplement
Version	3
Sampling	Optional
Sequencer	16-track sequencer
Keyboard	61 keys
MIDI	Yes
Effects	Reverb, chorus, delay, EQ, distortion