Kyocera ECOSYS FS-C2126MFP User Manual

Document Box
6-10
12 The number of copies screen appears. Set the
number of copies and press the OK key.
13 The file print confirmation screen appears. Press
[Yes] (the Left Select key). Accepted appears and
printing begins.
Quick Copy mode
This mode is used to print an additional copy of a document that has already been printed. If a document is
printed with Quick Copy selected in the printer driver, the document will be simultaneously stored on the RAM
disk. The required number of copies can be printed whenever needed from the operation panel. If more
documents than the set maximum are stored, the oldest job will be overwritten each time a new job is stored.
When the machine power is turned off, jobs stored in this mode are erased. For the number of documents that
can be stored in Quick Copy mode, see Quick Copy Jobs
on page 8-76.
1 Press the Document Box key. The Document Box
menu appears.
2 Press the U or V key to select [Job Box].
3 Press the OK key. The Job Box menu appears.
4 Press theU or V key to select [Quick Copy].
5 Press the OK key. The user selection menu
appears.
6 Press the U or V key to select the user.
Copies: a b
(1 - 999,---)
******** copies
---
Document Box:
a b
*********************
2 Polling Box
3 Job Box
1 Sub Address Box
Job Box:
a b
*********************
2 Quick Copy
1 Private Print
Quick Copy:
a b
*********************
l Maury
l Fiala

Kyocera ECOSYS FS-C2126MFP Specifications

General

Brand	Kyocera
Model	ECOSYS FS-C2126MFP
Category	All in One Printer
Language	English