Default Setting (System Menu)
8-42
Collate
Set the defaults for Collate. The table below shows the available settings.
NOTE: Refer to page 3-20 for Collate/Offset.
Use the procedure below to set the default Collate/Offset settings.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Common Settings].
2 Press the OK key. The Common Settings menu
appears.
3 Press the U or V key to select [Function Default].
4 Press the OK key. The Function Default menu
appears.
5 Press the U or V key to select [Collate].
6 Press the OK key. Collate appears.
7 Press the U or V key to select [Off] or [On].
Item Description
Collate Off Collate not performed.
On Collate performed.
Sys. Menu/Count.:
a
b
4
User/Job Account
5
User Property
*********************
[ Exit ]
6
Common Settings
Common Settings:
a
b
*********************
2
Default Screen
3
Sound
[ Exit ]
1
Language
Function Default:
a
b
*********************
2
Scan Resolution
3
FAX Resolution
[ Exit ]
1
Color Selection
Collate:
a
b
1
Off
*********************
2
*On
To Next Page
Loading...
Need help?
General
