Troubleshooting > Troubleshooting
673
1101 "Failed to send via FTP." is displayed
Message
Failed to send via FTP.
Check the host name or IP address of FTP.
Job is canceled. Press [End].
1101
Corrective Actions
Check the host name of the FTP.
1
When entering the destination information, make sure that the host name or IP
address of the FTP server is correct.
➡ Sending Document to Folder on an FTP Server (Scan to FTP) (page 248)
To specify a destination registered in the address book, proceed to the next step.
2
Check the Address Book
1 [System Menu / Counter] key > [FunctionSettings] > [Address Book] > [Add/Edit Machine Address Book]
2 Select the information icon for the destination.
3 Make sure that the host name or IP address of the FTP server is correct.
If it is incorrect, correct it.
4 [Register] > [OK]
Register the changed destination.
➡ Editing Contact Address in Address Book (page 177)
To Next Page
Loading...
