System Menu > Network
205
[TCP/IP Settings][TCP/IP Settings]
[TCP/IP]
Select whether to use TCP/IP Protocol.
Value: [Off], [On]
[IPv4 Setting]
Set up TCP/IP (IPv4) to connect to the network.
This setting is available when [TCP/IP] is [On].
Item Description
[DHCP] Select whether to use the DHCP (IPv4) server.
Value: [Off], [On]
[Auto-IP] Select whether to use Auto-IP.
Value: [Off], [On]
[IP Address] Set the IP address.
Value: ###.###.###.###
NOTE
When DHCP is set to [On], the value cannot be entered.
[Subnet Mask] Set the IP subnet mask.
Value: ###.###.###.###
NOTE
When DHCP is set to [On], the value cannot be entered.
[Default Gateway] Set the IP gateway address.
Value: ###.###.###.###
NOTE
When DHCP is set to [On], the value cannot be entered.
[DNS Server] Set the IP address of DNS (Domain Name System) server.
Value: [Auto (DHCP)], [Manual]
NOTE
When [Manual] is selected, enter the DNS server IP address in the
Primary and Secondary fields provided.
[DNS over TLS] Set whether to connect to a DNS server during communication
protected by TLS.
Value: [Off], [On], [Auto]
To Next Page
Loading...
