System Menu > Network
215
[IPP over TLS]
[HTTP]
[HTTPS]
[LDAP]
Item Settings
[Off/On] Sets whether to receive documents using TLS-protected IPP. To use this,
select [On] in these settings, and select [On] for [TLS] in the [Security].
The default port number is 443.
*1
The setting will be changed after restarting the device or network.
Value: [Off], [On], 1 to 32767 (Port Number)
NOTE
If the setting is [On], a TLS certificate is required. The factory certificate is
the certificate owned by the machine.
[AvailableNetwork] Set whether to enable this function for each network of Wi-Fi Direct,
Wi-Fi and wired.
Value: [Disable], [Enable]
Item Description
[Off/On] Set whether to communicate using HTTP.
The setting will be changed after restarting the device or network.
Value: [Off], [On]
[AvailableNetwork] Set whether to enable this function for each network of Wi-Fi Direct,
Wi-Fi and wired.
Value: [Disable], [Enable]
Item Description
[Off/On]
Select whether to communicate using HTTPS.
*1
The setting will be changed after restarting the device or network.
Value: [Off], [On]
[AvailableNetwork] Set whether to enable this function for each network of Wi-Fi Direct,
Wi-Fi and wired.
Value: [Disable], [Enable]
Item Description
[Off/On] Select whether to use LDAP.
Value: [Off], [On]
To Next Page
Loading...
