System Menu > Device Common
230
[Power Off Rule]
Select whether or not the machine enters Power Off mode for the following function.
Select [On] to set the Power Off mode.
• Network
• USB Cable
• USB Host
• NIC
(Displayed when the optional Network Interface Kit is installed.)
Value: [Off], [On]
Even when any of the functions is set to [On], if [NIC] is set to [Off] the machine does not enter Power Off Mode.
Even when [Network] or [USB Cable] is set to [Off], if the machine does not communicate with the other devices,
the machine will enter Power Off Mode.
[Power Off Timer]
Select whether to turn off the power automatically after a period of inactivity.
Value: [1 hour], [2 hours], [3 hours], [4 hours], [5 hours], [6 hours], [9 hours], [12 hours], [1 day], [2 days], [3 days],
[4 days], [5 days], [6 days], [1 week]
[WeeklyTimer Set.]
Configure settings for switching the machine into Sleep mode and waking it automatically at a specified time for
each day of the week.
[Auto Err. Clear]
If an error occurs during processing, processing stops to wait for the next step to be taken by the user. In the Auto
Error Clear mode, automatically clear the error after a set amount of time elapses.
Item Description
[Weekly Timer] Select whether to use Weekly Timer.
Value: [Off], [On]
[Schedule] Specify the time for each day of the week at which the machine enters
Sleep mode and recovers.
[Retry Settings] Set the number of retry to switch the machine into Sleep mode.
Value: [On], [Off]
NOTE
• If [On] is selected, set the number of retries. The setting range is 0 to
10.
• If [Off] is selected, retry is performed until the machine enters Sleep
mode.
[Retry Interval] Set the retry interval.
Use [ ][ ] to enter a number.
Value: 10 to 60 seconds (in 10 second increments)
To Next Page
Loading...
