System Menu > Security
237
Configuring Security Quick Setup
1
Display the screen.
1 [Menu] key > [ ][ ] key > [Security] > [OK] key > [ ][ ] key > [Netwk Security] > [OK] key >
[SecurityQuickSet] > [OK] key
NOTE
If the user authentication screen appears, log in with a user who has the privilege to configure this
setting. If you do not know your login user name or password, please contact your administrator.
2
Select the security level according to the usage environment.
3
Configure the security function as necessary.
NOTE
Refer to the following for the settings of each security level.
➡ Security Quick Setup Function List (page 402)
4
Restart the device or network.
➡ Restart (page 246)
➡ Restart Network (page 224)
[TLS Setting]
Item Description
[TLS] Set whether to use TLS for communication.
Value: [Off], [On]
To Next Page
Loading...
