Troubleshooting > Troubleshooting
330
A lighter version of the previous image remains and is repeatedly
printed
The GS settings need to be adjusted.
1
Configure the settings for GS.
1 Select the [Menu] key > [ ][ ] key > [Adjust/Maint.] > [OK] key > [ ][ ] key > [Service Setting] >
[OK] key > [ ][ ] key > [GS] > [OK] key.
Increase the value one level from the current value.
2 Select the [Menu] key > [ ][ ] key > [Adjust/Maint.] > [OK] key > [ ][ ] key > [Image Adjustment]
> [OK] key.
Perform only calibration.
3 Print a document and confirm the image quality.
Increase the value until the image is improved.
NOTE
If there is still no improvement, return the setting to the original value.
2
If white dots appear in the improved image, decrease the value by one level.
3
If the white background of the improved image appears colored, proceed to the next
step. If there is no unnecessary coloring, finish editing.
4
Configure the settings for MC.
1 Select the [Menu] key > [ ][ ] key > [Adjust/Maint.] > [OK] key > [ ][ ] key > [Service Setting] >
[OK] key > [ ][ ] key > [MC] > [OK] key.
Increase the value one level from the current value.
2 Select the [Menu] key > [ ][ ] key > [Adjust/Maint.] > [OK] key > [ ][ ] key > [Image Adjustment]
> [OK] key.
Perform only calibration.
3 Print the document and confirm the image quality.
Increase the value until the image is improved.
To Next Page
Loading...
