Troubleshooting > Adjustment/Maintenance
358
Performing Color Registration Procedure (Standard Registration)
1
Load paper.
IMPORTANT
• Load the paper with the print side facing up.
• After removing new paper from its packaging, fan out the paper before loading it in the cassettes.
➡ Precaution for Loading Paper (page 90)
• Before loading the paper, be sure that it is not curled or folded. Paper that is curled or folded may cause
paper jams.
• Ensure that the loaded paper does not exceed the level indicator (see illustration above).
• If paper is loaded without adjusting the paper length guide and paper width guide, the paper may skew
or become jammed.
2
Display the screen.
[Menu] key > [ ][ ] key > [Adjust/Maint.] > [OK] key > [ ][ ] key > [Color Regist.] > [OK] key >
[ ][ ] key > [Normal] > [OK] key
3
Print the chart.
[ ][ ] key > [Print Chart] > [OK] key > [Yes]
A chart is printed. Three types of charts are printed on a single sheet of paper for the three colors M
(Magenta), C (Cyan), and Y (Yellow): H-L (Left), V (Center), and H-R (Right).
After printing, return to the Color Printing Position Correction Standard menu.
To Next Page
Loading...
