Installing and Setting up the Machine > Default Settings of the Machine
51
Wireless LAN Connection by Wi-Fi Direct Using Wi-Fi Setup Tool
To send the Wi-Fi settings configured in the Wi-Fi Setup Tool to the machine, connect the computer or mobile
device with the machine locally.
To use Wi-Fi Direct, confirm that the Wi-Fi Direct is enabled (Wi-Fi Direct is set to [On]) and Restart Network from
the operation panel, before your computer will be connected to this machine with Wi-Fi Direct.
NOTE
Configure the settings on the operation panel if your computer supports WPS.
➡ Wi-Fi Settings (page 202)
➡ Wireless Network (page 222)
1
Display the screen.
[Menu] key > [ ][ ] key > [Network] > [OK] key > [ ][ ] key > [Wi-Fi Direct Set] > [OK] key > [ ][ ]
key > [Wi-Fi Direct] > [OK] key
2
Configure the settings.
[ ][ ] key > [On] > [OK] key
3
Restart the network.
[Menu] key > [ ][ ] key > [Network] > [OK] key > [ ][ ] key > [Restart Network] > [OK] key > [Yes]
4
Connect a computer or a mobile device with the machine.
➡ Setting Wi-Fi Direct (page 54)
5
Launch the Wi-Fi Setup Tool.
1 Launch your Web browser.
2 Enter "https://kyocera.info/" into the browser’s address bar or location bar.
To Next Page
Loading...
