Kyocera FS-6020 - Menu Selection System; Entering the Mode Selection Menu; Selecting a Menu; Setting a Menu

Chapter 1 Using the Operator Panel
1-4
This section explains how to use the menu selection system. The MENU key on the operator panel allows you to use the menu to
set or change the printer environment such as the number of copies to print, emulation, etc., to your specific needs. Settings can
be made when Ready is indicated on the printer message display.
The printer obeys the most recently received printer settings sent from the application software, or from the printer driver, which
take priority over operator panel settings.
Entering the Mode Selection Menu
Press the MENU key when Ready is indicated on the printer message display.
The mode selection menu is displayed.
Selecting a Menu
The mode selection menu is hierarchical. Press the or
key to display the desired menu.
•If the selected menu has a sub-menu,
> is displayed after
the menu.
Press the key to move to the sub-menu or key to go
back.
•
> is displayed before the sub-menu.
Indicates that this is the sub-menu
Press the key to move to another sub-menu or key to
go back.
•
>> is displayd before the second sub-menu.
Setting a Menu
Select the desired menu and press the ENTER key to set or
change the configuration.
Press the or key to display the desired item and the
ENTER key to finalize the value or selections set.
Cancelling Menu Selection
If you press the MENU key when selecting a menu, the mes-
sage display returns to Ready.
Menu Selection System
ModeSelectionMenu
Press
Ready
PARA4PLAIN
Print
MenuMap
Print
StatusPage
PaperHandling>
>CassetteSize>
Custom
>>Unit
mm
>MPTraySize
A4
key.
Press
key.
Press
key.
Sub-menu
Press
key.
Press
key.
Paper Handling >
>Cassette Size >
Custom
>>Unit
mm
Indicates that there is a
sub-menu
Indicates that this is the second sub-menu
Indicates that there is
another sub-menu