Kyocera FS-6020 - Printing Lists of Fonts

Chapter 1 Using the Operator Panel
1-13
To help in selecting fonts, you can print a list of the fonts in-
cluding option fonts. The list of the option fonts may not be
printed when there is no option font stored in the memory
card or hard disk.
Press the MENU key.
Press the or key repeatedly until Font > ap-
pears.
Press the key.
Press the or key repeatedly until >List of
Internal Fonts or >List of Option Fonts ap-
pears.
(Internal Fonts)
(Optional Fonts)
Press the ENTER key. A question mark (?) appears.
(Internal Fonts)
(Optional Fonts)
Press the ENTER key again. Processing appears,
then Ready. The printer prints a list of fonts with a
short sample and the font ID (number) for each font.
Lists of Fonts
Printing Lists of Fonts
Font >
>List of
Internal Fonts
>List of
Option Fonts
>List of
Internal Fonts?
>List of
Option Fonts ?
1
2
3
4
5
6
Internal Scalable and Bitmapped Fonts List
Font Name Scalable/Bitmap Password Selection [FSET] Font ID
PRESCRIBE
Internal Scalable and Bitmapped Fonts List
Font Name Scalable/Bitmap Password Selection [FSET] Font ID
PRESCRIBE