Chapter 1 Using the Operator Panel
1-14
It is possible to print data received by the printer as hexadec-
imal code for the purposes of debugging programs and files.
Press the MENU key.
Press the or key repeatedly until Others > ap-
pears.
Press the key.
Press the or key repeatedly until >Print
HEX-DUMP appears.
Press the ENTER key. A question mark (?) appears.
Press the ENTER key again. Processing appears
for a second, and then Waiting appears.
Send data to be dumped to the printer. The message
Processing will be displayed while receiving the
data.
Once the dumped data you require has been output,
it is possible to cancel the printing of any further
dumped data by taking the printer offline by
pressing the CANCEL key and then pressing the
ENTER key.
Once all data has been received, the message
Waiting will appear. Press the GO key to finish
printing.
Dumping Received Data
Others >
>Print HEX-DUMP
>Print HEX-DUMP?
Processing
--- A4 PLAIN
Waiting
--- A4 PLAIN
1
2
3
4
5
6
7
8
To Next Page
Loading...
