EasyManua.ls Logo

Kyocera FS-6020 - Paper Type

Kyocera FS-6020
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 2 Paper Selection
2-6
Colored Paper
Colored paper should satisfy the same conditions as white
bond paper, listed in
Paper Specifications on page 2-1
. In
addition, the pigments used in the paper must be able to
withstand the heat of fusing during the printing process (up
to 200 °C or 392 °F).
Preprinted Paper
Preprinted paper should have a bond paper base and meet the
specifications listed in the table on
page 2-2
. The preprinted
ink must be able to withstand the heat of fusing during the
printing process, and must not be affected by silicone oil.
Do not use paper with any kind of surface treatment, such as
the type of paper commonly used for calendars.
Recycled Paper
Select recycled paper that meets the same specifications as
the white bond paper (see
Paper Specifications on page 2-1
)
except whiteness.
Before purchasing recycled paper, test a sample on the printer
and check that the print quality is satisfactory.
The printer is capable of printing under the optimum setting
for the type of paper being used.
Setting the paper type for the paper source from the printer’s
operator panel will cause the printer to automatically select
the paper source and print in the mode best suited to that type
of paper.
A different paper type setting can be made for each paper
source including the MP tray. Not only can preset paper types
be selected, but it is also possible for you to define and select
customized paper types. See
Customizing the Paper Type on
page 1-19
.
The following types of paper can be set.
Yes: Can be stored No: Cannot be stored
*
This is a paper type defined and registered by the user. Up
to eight types of user settings may be defined. For details,
see
Customizing the Paper Type on page 1-19
.
NOTE
Paper Type
Paper
Source
Media
Type
MP
Tray
Paper
Cas-
sette
Paper
Weight
Duplex
Path
(MP tray
available
only in Cas-
sette mode)
Plain Yes Yes Normal Yes
Transparency
Yes No E xtra
Heavy
No
Preprinted Yes Yes Normal Yes
Labels Yes No Normal No
Bond Yes Yes Normal Yes
Recycled Yes Yes Normal Yes
Vellum Ye s N o Ligh t
(Thin)
No
Rough Yes Yes Normal Yes
Letterhead Yes Yes Normal Yes
Color Yes Yes Normal Yes
Prepunched Yes Yes Normal Yes
Envelope Yes No Heavy
(Thick)
No
Cardstock Yes No H eavy
(Thick)
No
Thick Yes No Heavy
(Thick)
No
Custom 1
(to 8)
*
Yes Yes Normal Yes

Table of Contents

Other manuals for Kyocera FS-6020

Related product manuals