Chapter 1 Using the Operator Panel
1-34
You can set the default print resolution in three ways:
300 dpi, 600 dpi and Fast 1200 mode. The clarity of printed
characters and graphics becomes sharper in this order.
Fast 1200 mode can only be set with the PCL 6, KPDL or
KPDL (AUTO) emulation.
Press the MENU key.
Press the or key repeatedly until Print
Quality > appears.
Press the key.
Press the or key repeatedly until
>Resolution appears.
Press the ENTER key. A blinking question mark (?)
appears.
Select Fast 1200 mode, 300 dpi or 600 dpi using
the or key.
Press the ENTER key.
Press the MENU key. The message display returns to
Ready.
Setting the Resolution
NOTE
Print Quality >
>Resolution
Fast 1200 mode
>Resolution
? Fast 1200 mode
1
2
3
4
5
6
7
8
To Next Page
Loading...
