6
Introduction
The Kyocera Mita page printer has many desirable features,
such as the EcoPrint function that reduces the toner
consumption and the Auto Media Type Selection function
that selects the media automatically before printing.
This section explains the following topics:
•For More Information...
•Guide to the Operation Guide
This Operation Guide has the following chapters:
Chapter 1 Using the Operator Panel
This chapter explains the message display, indicators and
keys on the operator panel, and how to make various settings
from the operator panel.
Chapter 2 Paper Selection
This chapter explains the types of paper that can be used with
the printer.
Chapter 3 Maintenance
This chapter explains how to replace the toner container and
how to care for your printer.
Chapter 4 Troubleshooting
This chapter explains how to handle printer problems that
may occur, such as paper jams.
Chapter 5 Fonts
This chapter explains about fonts and lists the printer’s
internal fonts.
Chapter 6 Option Units
This chapter introduces the available options to be used with
the printer.
Appendix A Host Computer Interface
This appendix explains the pin assignment and specifications
for the printer’s parallel interface, USB interface, and serial
interface.
Appendix B Specifications
This appendix lists the printer’s specifications.
Glossary
This glossary explains the terminology used in this manual.
For More Information...
Item Description
Installation Guide
(paper manual)
Describes procedures from
printer setup to printing a test
page.
The following documents are stored in the CD-ROM as PDF
documents.
Operation Guide
(this manual)
Guides you through topics
concerning the operations and
maintenance of the printer.
KX Printer Drivers
Operation Guide
Describes how to install and
set the printer driver.
PRESCRIBE Commands
Technical Reference
PRESCRIBE is the native
language of the Kyocera Mita
printers. This Technical
Reference contains the
information about how the
printing is performed using
the PRESCRIBE commands
as well as the font and
emulation description. Also
included is a list of permanent
parameters and their
explanation needed when
customizing your printer.
PRESCRIBE Commands
Command Reference
Gives a detailed explanation of
the PRESCRIBE command
syntax and parameters with the
aid of print examples.
Guide to the Operation Guide
To Next Page
Loading...
