Chapter 3 Maintenance
3-2
Gently lift the toner container and remove it.
Keep the removed toner container flat.
Put the supplied cap on the used toner container to
prevent toner spill.
Place the used toner container into the supplied
plastic bag, and seal it up before disposing.
Take a new toner container out of the toner kit.
Shake the new toner container as shown in the fig-
ure below ten times or more to ensure that the toner
is evenly distributed inside.
Carefully remove the protective seal (orange-col-
ored) from the new toner container as shown below.
Install the new toner container into the printer.
Push firmly on the top of the toner container at the
positions marked PUSH HERE until you hear it click
into place.
NOTE
3
4
The cap should not be put on the
new toner container.
5
6
7
8
9
To Next Page
Loading...
