Kyocera FS FS-1920 User Manual

e-MPS
1-73
9
When the desired size is displayed, press the ENTER key.
10
Press the MENU key. The message display returns to Ready.
Maximum Space Assigned to Virtual Mailboxes
This changes the Microdrive space for virtual mailboxes. You can change
the maximum space from 0 to 9999 (megabytes). The actual maximum size
depends on the size of free Microdrive space, however. The default size is
50 MB.
1
Press the MENU key.
2
Press the or key repeatedly until e-MPS > appears.
3
Press the > key.
4
Press the or key repeatedly until >e-MPS Configuration >
appears.
5
Press the > key.
6
Press the or key repeatedly until >>VMB Size appears.
7
Press the ENTER key. A blinking cursor ( ) appears.
8
Press the or key to increase or decrease, respectively, the value
at the blinking cursor. Use the > and < keys to move the cursor right
and left.
9
When the desired size is displayed, press the ENTER key.
10
Press the MENU key. The message display returns to Ready.
e-MPS >
>e-MPS >
Configuration
>>VMB Size
050MB
>>VMB Size
050MB

Kyocera FS FS-1920 Specifications

General

Print Technology	Laser
Print Speed	19 ppm
Resolution	600 x 600 dpi
Max Paper Size	A4
Connectivity	USB 2.0
Memory	32 MB
Duplex Printing	Manual