6600 Product manual
Operator Manual
⚫ Users should install and use the electromagnetic compatibility information provided by
the random file;
⚫ Portable and mobile RF communications equipment may affect (device or system)
performance, avoiding strong electromagnetic interference when used, such as near
cell phones, microwave ovens, etc.
⚫ The instructions for the guide and the manufacturer are detailed in the annex.
CAUTION
⚫ (Equipment or system) should not be used close to or stacked with other equipment.
If it must be used close to or stacked, it should be observed to be able to operate
normally in its configuration;
⚫ In addition to cables sold by manufacturers of (equipment or systems) as spare parts
for internal components, the use of accessories and cables outside of the regulations
may result in increased (device or system) emissions or reduced immunity.
Attachment：
Electromagnetic Emissions
Guidance and manufacturer’s declaration — electromagnetic emissions
The models 6600 series are intended for use in the electromagnetic environment
specified below. The customer or the user of the 6600 series should assure that it is
used in such an environment.
Electromagnetic environment – guide
The models 6600 series use RF energy only for its
internal function. Therefore, its RF emissions are
very low and are not likely to cause any
interference in nearby electronic equipment.
The models 6600 series are suitable for use in all
establishments other than domestic, and may be
used in domestic establishments and those directly
connected to the public low-voltage power supply
network that supplies buildings used for domestic
purposes, provided the following warning is
needed.
Warning: The models 6600 series are intended for
Harmonic
Emissions
EN 61000-3-2
Voltage
Fluctuations/flicker
emissions
To Next Page