distance calculated from the
equation applicable to the
frequency of the transmitter.
Recommended separation
distance
d=[3.5/V
3
]×P
V2
d=1.2×P
1/2
80MHz to 800 MHz
d=2.3×P
1/2
800MHz to 2.7GHz
Where P is the maximum output
power rating of The transmitter in
watts (W) according to the
transmitter manufacturer and d is
the recommended separation
distance in meters (m).
Field strengths from fixed RF
transmitters, as determined by an
electromagnetic site survey,
should be less than the
compliance level in each
frequency range.
Interference may occur in the
vicinity of equipment marked with
the following symbol:
Recommended isolation distance between portable and mobile RF communications
equipment and (equipment or system)
To Next Page