EDS-MD® Medical Device Server User Guide 18
2: Introduction
The EDS-MD medical device server is a complete network-enabling solution. This device server
allows system integrators and administrators to go to market quickly and easily with Ethernet
networking and web server capabilities. EDS-MD models are available in 4, 8 and 16 port
configurations.
Key Features
Power Supply: Direct plug-in to wall AC with universal 100-240 VAC input.
Controller: 32-bit ARM11 microprocessor running at 600 megahertz
Memory: 64 megabit Flash, 2 gigabit DDR2 DRAM, and a 4 gigabyte SDHC card (internal
only-not user replaceable).
Ethernet: Gigabit Ethernet support (10/100/1000Base-T) speed auto-sensing, automatic MDI/
MDIX (straight and cross-over cables are OK to use)
Serial Ports: 4 to 16 ports depending on model (EDS-MD 4, EDS-MD 8 or EDS-MD 16),
electrically isolated from one another and other circuits. Hardware/Software handshaking
capability. Custom/standard baud rates up to 921600 bits per second (bps).
USB Ports: 2 ports of fixed full-speed 2.0 USB Host, electrically isolated from one another
and other circuits, capable of providing 0.5A each.
Temperature Range: 0°C to +50°C (32° to 122°F).
Applications
The EDS-MD 4, EDS-MD 8 and EDS-MD 16 device servers are suitable for these application
scenarios:
Patient Monitoring Devices
Glucose Analyzers
Infusion Pumps
Protocol Support
The EDS-MD medical device server contain a full-featured IP networking stack:
ARP, UDP, TCP, ICMP, DHCP, Auto IP, Telnet, SMTP, DNS, FTP, TFTP, and Syslog for
network communications and management.
TCP, UDP and tunneling to the serial port.
TFTP for uploading/downloading files.
FTP, SFTP, HTTPS and HTTP for firmware upgrades and uploading/downloading files.
To Next Page
Loading...
Need help?
General