6: Network Settings
EDS-MD® Medical Device Server User Guide 41
Using XML
Include in your file: <configgroup name="link" instance="eth0">
Network 2 (eth1) Interface Settings
Table 6-3 shows the network 2 interface settings that can be configured.
Table 6-3 Network 2 (eth1) Interface Settings
To Configure Network 2 (eth1) Interface Settings
Using Web Manager
To modify Network 2 (eth1) interface settings, click Network on the menu and select Network
2 -> Interface -> Configuration.
Using the CLI
To enter the eth0 command level: enable -> config -> if 2
Using XML
Include in your file: <configgroup name="interface" instance="eth1">
To View Network 2 (eth1) Interface Status
Using Web Manager
In Network 2 (eth1) Interface Status, you can view and configure the current operational settings.
To view Ethernet (eth1) Status, click Network on the menu and select Network 2 -> Interface
-> Status.
Network 1 (eth0)
Interface Settings
Description
State Select to enable or disable. Click the Submit button to enter your choice.
To Next Page
Loading...
Need help?
General