Lantronix EDS-MD Series User Manual

12: Management Interface Settings
EDS-MD® Medical Device Server User Guide 90
Telnet Settings
The Telnet settings control CLI access to the EDS-MD 4/8/16 device server telnet over the Telnet
protocol.
Table 12-2 Telnet Settings
To Configure Telnet CLI Settings
Using Web Manager
 To configure Telnet settings, click CLI in the menu and select Configuration.
Using the CLI
 To enter the Telnet command level: enable -> config -> cli -> Telnet
Using XML
 Include in your file:
<configgroup name=”Telnet”>
and
<configitem name=”state”>
and
<configitem name=”authentication”>
SSH CLI Settings
The SSH settings control CLI access to the EDS-MD device over the SSH protocol.
Table 12-3 SSH Settings
Telnet Settings Description
Telnet State Select to enable or disable CLI access via Telnet
Telnet Port Enter an alternative Telnet Port to override the default used by the CLI server.
Blank the field to restore the default.
Telnet Max Sessions Specify the maximum number of concurrent Telnet sessions that will be allowed.
Telnet Authentication Select to enable or disable authentication for Telnet logins.
SSH Settings Description
SSH State Select to enable or disable CLI access via SSH.
SSH Port Specify the SSH Port and override the default, as needed. Blank the field to
restore the default.
SSH Max Sessions Specify the maximum number of concurrent SSH sessions that will be allowed.

Lantronix EDS-MD Series Specifications

General

Brand	Lantronix
Model	EDS-MD Series
Category	Server
Language	English