11: Maintenance and Diagnostics Settings
EDS-MD® Medical Device Server User Guide 88
System Settings
The EDS-MD device server system settings allow for rebooting the device, restoring factory
defaults, uploading new firmware and updating a system’s short and long name.
Note: Anytime you reboot the unit, this operation will take some time to complete.
Please wait a minimum of 10-20 seconds after rebooting the unit before attempting to
make any subsequent connections.
Table 11-12 System Settings
To Reboot or Restore Factory Defaults
Using Web Manager
To access the area with options to reboot, restore to factory defaults, upload new firmware,
update the system name (long or short names) or to view the current configuration, click
System in the menu.
Using the CLI
To enter the command level: enable
Using XML
Include in your file: <configgroup name=”xml import control”>
System Settings Description
State Click to enable or disable the reboot schedule.
Reboot Device Click the Reboot button to reboot the device.
Restore Factory Defaults
Click Factory Defaults to restore the device to the original factory settings. All
configuration will be lost. The EDS-MD unit automatically reboots upon setting
back to the defaults.
Upload New Firmware
FTP to the EDS-MD device. Upload new firmware to the EDS-MD unit by
clicking Choose File to browse to the new firmware file, and click Upload
button to upload the chosen file to the system. The device automatically
reboots upon the installation of new firmware.
Short Name Enter a short name for the system name. A maximum of 32 characters are
allowed.
Long Name Enter a long name for the system name. A maximum of 64 characters are
allowed.
Submit (button) Click Submit after entering the system name.
To Next Page
Loading...
Need help?
General