Lantronix EDS-MD Series User Manual

EDS-MD® Medical Device Server User Guide 33
5: Configuration Using Web Manager
This chapter describes how to configure the EDS-MD 4, EDS-MD 8 or EDS-MD 16 device server
using Web Manager, the Lantronix browser-based configuration tool. The unit’s configuration is
stored in non-volatile memory and is retained without power. All changes take effect immediately,
unless otherwise noted. It contains the following sections:
 Accessing Web Manager
 Device Status Page
 Web Manager Components
 Navigating Web Manager
Accessing Web Manager
Note: You can also access the Web Manager by selecting the Web Configuration tab on
the DeviceInstaller application window.
To access Web Manager, perform the following steps:
1. Open a standard web browser. Lantronix supports the latest versions of Internet Explorer,
Mozilla Firefox, Safari or Chrome web browsers.
2. Enter the IP address or hostname of the EDS-MD unit in the address bar. The IP address may
have been assigned manually using DeviceInstaller (see the EDS-MD Medical Device Server
Quick Start Guide) or automatically by DHCP.
3. Enter your username and password. The factory-default username is “admin” and “PASS” is
the default password. The Device Status web page displays configurations including network
settings, line settings, tunneling settings, and product information.

Lantronix EDS-MD Series Specifications

General

Brand	Lantronix
Model	EDS-MD Series
Category	Server
Language	English