11: Maintenance and Diagnostics Settings
EDS-MD® Medical Device Server User Guide 83
Using the CLI
To enter the command level: enable -> config -> icmp
Using XML
Include in your file: <configgroup name=”icmp”>
To View ICMP Protocol Stack Settings
Using Web Manager
To view ICMPv6 protocol settings, click Protocol Stack in the menu and select ICMPv6.
Using the CLI
Not applicable.
Using XML
Not applicable.
ARP Settings
Table 11-7 ARP Protocol Stack Settings
To Configure ARP Network Stack Settings
Using Web Manager
To configure ARP protocol settings, click Protocol Stack in the menu and select ARP.
Using the CLI
To enter the command level: enable -> config -> arp
Using XML
Include in your file: <configgroup name=”arp”>
Protocol Stack
ARP Settings
Description
IP Address Enter the IP address to add to the ARP cache. After entering the MAC address, click
the Add button.
MAC Address Enter the MAC address to add to the ARP cache. After also entering the IP address,
click the Add button.
Add (button) Click the Add button after entering the ARP Cache information.
Remove Click the Remove link beside a specific address to remove it.
Remove All Click the Remove All link underneath all listed addresses to remove all the addresses.
To Next Page
Loading...
Need help?
General