EDS-MD® Medical Device Server User Guide 30
4: Using DeviceInstaller
This chapter covers the steps for locating an EDS-MD unit and viewing its properties and device
details. The Lantronix® DeviceInstaller™ application is a free utility program provided by Lantronix
that discovers, configures, upgrades and manages Lantronix device servers.
Notes:
For instructions on using the DeviceInstaller utility to configure the IP address and
related settings or for more advanced features, see the DeviceInstaller Online Help.
Auto IP generates a random IP address in the range of 169.254.0.1 to
169.254.255.254, with a netmask of 255.255.0.0, if no BOOTP or DHCP server is
found. These addresses are not routable.
Accessing EDS-MD Using DeviceInstaller
Note: Make note of the MAC address. It may be needed to perform various functions in
the DeviceInstaller application.
To use the DeviceInstaller utility, first install the latest version from the downloads page on the
Lantronix web site www.lantronix.com/downloads
.
1. Run the executable to start the installation process and respond to the installation wizard
prompts. (If prompted to select an installation type, select Typical.)
2. Click Start -> All Programs -> Lantronix -> DeviceInstaller 4.3 -> DeviceInstaller.
3. When DeviceInstaller starts, it will perform a network device search. To perform another
search, click Search.
4. Expand the EDS-MD 4, EDS-MD 8 or EDS-MD 16 folder by clicking the + symbol next to the
folder icon. The list of available Lantronix EDS-MD 4 devices appears.
5. Select the EDS-MD unit by expanding its entry and clicking on its IP address to view its
configuration.
6. On the right page, click the Device Details tab. The current EDS-MD device configuration
appears. This is only a subset of the full configuration; the full configuration may be accessed
via Web Manager, CLI or XML.
To Next Page
Loading...
Need help?
General