11: Maintenance and Diagnostics Settings
EDS-MD® Medical Device Server User Guide 85
To View the List of IP Sockets
Using Web Manager
To view IP Sockets, click Diagnostics in the menu and select IP Sockets.
Using the CLI
To enter the command level: enable, show ip sockets
Using XML
Include in your file: <statusgroup name=”ip sockets”>
Ping
The ping command can be used to test connectivity to a remote host.
Table 11-9 Ping Settings
To Ping a Remote Host
Using Web Manager
To ping a Remote Host, click Diagnostics in the menu and select Ping.
Using the CLI
To enter the command level: enable, ping <host> <count> <timeout>
Using XML
Not applicable.
Traceroute
Here you can trace a packet from the EDS-MD device server to an Internet host, showing how
many hops the packet requires to reach the host and how long each hop takes. If you visit a web
site whose pages appear slowly, you can use traceroute to determine where the longest delays
are occurring.
Diagnostics: Ping
Settings
Description
Host Enter the IP address or host name for the EDS-MD unit to ping.
Count Enter the number of ping packets EDS-MD device should attempt to send to the
Host. The default is 5.
Timeout Enter the time, in seconds, for the EDS-MD to wait for a response from the host
before timing out. The default is 5 seconds.
Submit (Button) Click the Submit button after entering ping information.
To Next Page
Loading...
Need help?
General