11: Maintenance and Diagnostics Settings
EDS-MD® Medical Device Server User Guide 84
SMTP Settings
Table 11-8 SMTP Protocol Stack Settings
To Configure SMTP Protocol Stack Settings
Using Web Manager
To configure ARP protocol settings, click Protocol Stack in the menu and select SMTP.
Using the CLI
To enter the command level: enable -> config -> smtp
Using XML
Include in your file: <configgroup name=”smtp”>
Diagnostics
The EDS-MD device servers have several tools for diagnostics and statistics. Various options
allow for the configuration or viewing of IP socket information, ping, traceroute, memory, and
processes.
Hardware
To View Hardware Information
Using Web Manager
To view hardware information, click Diagnostics in the menu and select Hardware.
Using the CLI
To enter the command level: enable -> device, show hardware information
Using XML
Include in your file: <statusgroup name=”hardware”>
IP Sockets
You can view the list of listening and connected IP sockets.
Protocol Stack
SMTP Settings
Description
Relay Address Enter the relay address to be used to direct all outbound email messages through a
mail server.
Relay Port Enter the relay port to be used for all outbound email messages through a mail server.
To Next Page
Loading...
Need help?
General