9: Network Services
EDS-MD® Medical Device Server User Guide 62
FTP Settings
The FTP protocol can be used to upload and download user files, and upgrade the EDS-MD
device server firmware. A configurable option is provided to enable or disable access via this
protocol.
Table 9-2 FTP Settings
To Configure FTP Settings
Using Web Manager
To configure FTP and view FTP statistics, click FTP in the menu.
Using the CLI
To enter the FTP command level: enable -> config -> ftp
Using XML
Include in your file: <configgroup name=”ftp server”>
Syslog Settings
The Syslog information shows the current configuration and statistics of the syslog. Here you can
configure the syslog host and the severity of the events to log.
Note: The system log is always saved to local storage, but it is not retained through
reboots unless diagnostics logging to the file system is enabled. Saving the system log to
a server that supports remote logging services (see RFC 3164) allows the administrator to
save the complete system log history. The default port is 514.
Table 9-3 Syslog Settings
FTP Settings Description
State Select to enable or disable the FTP server:
Enabled (default)
Disabled
Syslog Settings Description
State
Select to enable or disable the syslog:
Enabled
Disabled (default)
Host Enter the IP address of the remote server to which system logs are sent for storage.
Remote Port
Enter the number of the port on the remote server that supports logging services.
The default is 514.
To Next Page
Loading...
Need help?
General