Lantronix EDS-MD Series User Manual

7: Line and Tunnel Settings
EDS-MD® Medical Device Server User Guide 57
Modem Emulation
Some older equipment is designed to attach to a serial port and dial into a network with a modem.
This equipment uses AT commands to control the connection. For compatibility with these older
devices on modern networks, the EDS-MD device mimics the behavior of the modem.
Table 7-8 Tunnel Modem Emulation Settings
To Configure Tunnel Modem Emulation Settings
Using Web Manager
To configure the Modem Emulation for a specific tunnel, click Tunnel in the menu and select
Tunnel 1 -> Modem Emulation.Using the CLI
 To enter the Tunnel 1 Modem command level: enable -> tunnel 1 -> modem
Using XML
 Include in your file: <configgroup name=”tunnel modem” instance=”1”>
Tunnel Modem
Emulation Settings
Description
Echo Pluses Set whether the pluses will be echoed back during a “pause +++ pause” escape
sequence on the Serial Line. Choices are:
 Enabled
 Disabled (default)
Echo Commands Set whether characters read on the Serial Line will be echoed, while the Line is in
Modem Command Mode. Choices are:
 Enabled
 Disabled (default)
Verbose Response Set whether Modem Response Codes are sent out on the Serial Line. Choices are:
 Enabled
 Disabled (default)
Response Type Select a representation for the Modem Response Codes sent out on the Serial Line:
 Text (ATV1) (default)
 Numeric (ATV0)
Error Unknown
Commands
Set whether the Error Unknown Commands is enabled (ATU0) and ERROR is
returned on the Serial Line for unrecognized AT commands. Otherwise (ATU1) OK
is returned for unrecognized AT commands. Choices are:
 Enabled
 Disabled (default)
Incoming Connection Set if and how requests are answered after an incoming RING (ATS0=2):
 Disabled (default)
 Automatic
 Manual
Connect String Enter the customized Connect String sent to the Serial Line with the Connect
Modem Response Code.
Display Remote IP Set whether the Display Remote IP is enabled so that the incoming RING sent on
the Serial Line is followed by the IP address of the caller. Choices are:
 Enabled
 Disabled (default)

Lantronix EDS-MD Series Specifications

General

Brand	Lantronix
Model	EDS-MD Series
Category	Server
Language	English