If the coolant temperature becomes too high, a red alert
message banner will appear on the engine (and pave)
screens to notify operator the engine will shut down.
(Figure 4-12)
If this alert message pops up on the screen:
1. Turn off the engine (if it has not already shut down).
2. Remove key from the ignition.
3. Allow the machine to cool down several minutes,
then check the coolant level. Add more coolant if
needed. (Page 5-18)
4. Start the engine.
5. If issues are still present or the engine will not re-
start, contact your authorized dealer for assistance.
Figure 4-12. High Coolant Temperature Alert
Message
The following alert message appears if the engine oil
pressure becomes so low that the engine will shut down.
(Figure 4-13)
If this alert message pops up on the screen:
1. Turn off the engine (if it has not already shut down).
2. Remove key from the ignition.
3. Check the engine oil level. Add more oil if needed.
(Page 5-15)
4. Start the engine.
5. If issues are still present or the engine will not re-
start, contact your authorized dealer for assistance
if needed.
Figure 4-13. Low Oil Pressure Alert Message
Operation
LeeBoy Model 5300B Compact Paver4-20
To Next Page
Loading...
