Depending upon the engine fault, the engine output may
be temporarily restored. These URGENT messages
instruct the operator to move to a safe location, shut
down the machine, and contact your authorized dealer
for service. (Figures 4-18 and 19)
Figure 4-18. First Output Temporarily Restored Alert
Message
To restore engine after this event, press Button #4,
which accesses the Engine screen pop-up banner.
The engine symbol will be functional (not gray) in
this mode. Pressing Button #4 restores.
Pave ScreenPave Screen
Pressing the Home Button navigates to the Pave Screen
where paving function status is displayed, along with
a navigation banner for making speed adjustments.
(Figure 4-19)
Figure 4-19. Pave Screen
Engine status icons appear across the top of the
screen, with auger, conveyor, DPF level, generator, and
screed temperature shown in the row beneath.
NOTE: If “fault” appears instead of screed
temperature as shown in Figure 4-19, there is
an issue with the sensor.
The auger, conveyor and generator icons are the same
symbols shown on the main control panel and screed
keypad (generator is not shown on the screed keypad).
Conveyor speed is shown just below its icon. The auger
and conveyor icons display in three color states:
Red: Off
Green: On
Blue: Paused.
Operation
LeeBoy Model 5300B Compact Paver4-22
To Next Page
Loading...
