Magnetic Cup Magnetic Cup
HolderHolder
Magnetic cup holders can
be purchased for use with
your machine (and the rest
of your eet). (Figure 4-31)
See your authorized dealer
for details. Ask for Part
Number 1020521.
Figure 4-31. Magnetic
Cup Holder
Spray BarSpray Bar
An optional eight-foot (2.4 m) spray bar adds versatility
to coating applications. Mounted on the rear of the unit,
the spray bar allows operators to spray asphalt material
over a larger area, i.e., a road or driveway surface. The
spray bar is equipped with separate cut-off valves for
each of the six spray nozzles (three on each side) to
obtain the correct width for the job. (See Page 4-19 for
operation.)
Figure 4-30. Wheel Chocks
Wheel ChocksWheel Chocks
The optional wheel chocks are easy to use and prevent
trailer tires from rolling. This wheel chock prevents
trailer movement on the front and back side of the tire.
See your authorized dealer to purchase wheel chocks
for your tack distributor tires.
Operation
L300 and L600 Tack Distributors4-26
To Next Page
Loading...
