Configuration
Function blocks
Master frequency output (DFOUT)
8
8.2
8.2.3

8.2−12
EDSVF9383V EN 7.1−04/2012
Æ’ The input signals at X8 are amplified electrically and output directly.
Æ’ The signals depend on the assignment of the input X8.
ƒ The codes C0030, C0545 and the output DFOUT−OUT have no function.
Æ’ The zero track is only output if it is connected to X8.
Æ’ The input signals at X9 are amplified electrically and output directly.
Æ’ The signals depend on the assignment of the input X9.
ƒ The codes C0030, C0545 and the output DFOUT−OUT have no function.
Æ’ The zero track is output if it is connected to X9.
Signal at X8 is directly output
at X10
Signal at X9 is directly output
at X10
To Next Page
Loading...
Need help?
General
