LevelOne DSS-1000 - Adding Users

DSS-1000 User Manual
Adding Users
1. On the Setup screen, click User > User. By default,adminthe”usr is“ preset and cannot
be deleted.
2. Click Add User.
3. Enter the following information:
Item
Description
Name
Enter a user name. The name can be up to 63 alphanumeric
characters; symbols are not allowed.
Password
Enter the password that will be used by the user to log into
DSS-1000.
Confirm Password
Re-type the password here. The two passwords must match.
User Group
Select the group to where the user belongs. This group defines
the access rights granted for the user.
4. Click OK. The new user is added to the user table.
117