LevelOne DSS-1000 - Setting Tours

DSS-1000 User Manual
Setting Tours
Several preset points can be grouped into a “Tour”which directs the camera to cycle through
the series of preset points at specific interval time. Up to 32 tours can be set on DSS-1000.
The tour configuration is saved only on DSS-1000, not on the camera side.
On the Live View screen, move the mouse over the bottom of the screen to display the Menu
Panel, then click . You must login as an administrator to have PTZ control access (see 2.3
The Login Screen on page 33 for details). Then click the Preset Point Tab .
1
2
5
3
4
Item
Description
1
PTZ Control
Click the tab to display the page:
Tab

PTZ
(see page 33).

Preset Points
(see page 37).

Tour
2
Stop Tour
When the camera is on tour, click this icon to stop the tour.
3
Create / Edit
Click this icon to create or modify a tour. See How to Create /
Tour
Modify Tours on page 40.
4
Tour ID
The numbers indicate the tour ID. If the number is:
Number
 Red: The tour is currently running.
 White: The tour is set but not running.

 Gray: The tour is not set.
Click a tour ID number to start the tour.
5 Back / NextClick < to go back the previous page and > to go to the next page.
Page
39