DSS-1000 User Manual
Chapter 3:
Remote Management
This chapter describes DSS-1000 operation and management on a Remote Client side. It
contains the following topics:
Accessing the Device: Describes the setup procedures involve when accessing
DSS-1000 for the first time through a computer on the network. This includes changing
DSS-1000 IP address and adding the cameras.
The Live View Screen: Describes how to use the Live View screen, changing the
layout, channel patrolling, resetting the channel position, and syncing local and remote
display layout.
Accessing the Setup Screen: Provides an overview of the Setup menu.
Configuring System Settings: Describes how to view and modify the system settings
such as date and time, language, and how to filter information shown on the local
display.
Configuring Network Settings: Describes how to modify the IP configurations, port
mapping and other network settings.
Configuring the Cameras: Describes how to add and view the cameras and manage
the camera settings.
Configuring User Access: Describes how to add groups and users who can access
the Setup screen and limit the type of access granted to each group.
Viewing the System Log: Describes the information shown on the System Log page.
Rebooting the Device: Describes how to do a system reboot.
70
To Next Page
Loading...
Need help?
General
