DSS-1000 User Manual
TIP: Use the Duplicate button to add another camera with almost similar camera settings
to another channel, see Duplicating Cameras on page 59.
Adding Cameras Manually via RTSP
In case you want to add cameras via Real Time Streaming Protocol (RTSP), use the Add
Camera Manually (RTSP) function. This feature is useful when adding third party cameras
which support the standard RTSP.
1. On the Setup screen, click Camera.
2. Click on an empty channel number from the left panel, and click Add Camera Manually
(RTSP).
3. On Name, type a name you want to use to identify the camera (maximum of 32
alphanumeric characters, no spaces nor symbols). This name is saved only on DSS-
1000 and does not affect the settings on the camera side.
4. Enter the IP Address, URI (Uniform Resource Identifier), RTSP Port (by default 554),
Account and Password of the camera you want to connect to and select the streaming
protocol.
58
To Next Page
Loading...
Need help?
General
