DSS-1000 User Manual
4.3 How to Use the Pole Mount?
DSS-1000 comes bundled with pole mount accessories, like the cable straps and the bracket.
The cable straps can hold poles with 1” to 2” diameter.
1. With the smooth side outwards, insert the supplied cable straps through the
holes (A B C D).
NOTE: Use the inner A and D holes if mounting on a pole with 1” dia and D holes for a 2” diameter pole.
2. Align the pole mount to the pole.
3. Insert the cables through the latches and push all the way until they fit snugly to the pole.
131
To Next Page
Loading...
Need help?
General
