DSS-1000 User Manual
Using Optical / Digital PTZ
PTZ and zoom cameras have the option to toggle between optical and digital PTZ. Non-PTZ and
non-zoom cameras can still have digital PTZ functions when viewed on remote clients.
For PTZ and zoom cameras, right-click on the channel window
and click Digital PTZ or Optical PTZ to toggle between
optical and digital PTZ.
NOTE: This function is disabled for non-PTZ and non-zoom
cameras.
How to Use Optical PTZ
By default, PTZ and zoom cameras are on optical PTZ. A red cross-hair appears in the
middle of the channel window when the camera is selected. Use the mouse or the PTZ
Control Panel to do PTZ functions (see Using the PTZ Control Panel on page 87).
Pan/Tilt
Zoom in
Zoom out
To pan or tilt PTZ cameras, click the mouse anywhere on the Live View
screen to move in that direction. The length of the direction indicator (red line) is
proportional to the Pan and Tilt speed. The farther you place the cursor from the
center, the faster the Pan/Tilt movement.
To zoom in or zoom out, scroll the mouse wheel up to zoom in; scroll
the mouse wheel down to zoom out the image.
When the channel is viewed on full-screen, the red cross-hair does not appear but pan, tilt
and zoom functions can still be done the same way.
85
To Next Page
Loading...
Need help?
General
