DSS-1000 User Manual
2.4 Using the PTZ Control Panel
You can pan, tilt and zoom PTZ cameras locally using the PTZ Control Panel, as well
as create preset points and start tour.
To display the PTZ Control Panel, move the mouse over the bottom of the screen to display
the Menu Panel, then click . You must login as an administrator to have PTZ control
access (see 2.3 The Login Screen on page 33 for details).
TIP: Move the mouse over the icon to display the function name.
NOTE:
The PTZ control panel is enabled only when a PTZ or zoom camera is selected.
Although the panel appears when a non-PTZ/zoom camera is selected, all the
controls are disabled.
Digital PTZ is available on all cameras when using a remote client. See How to
Use Digital PTZ on page 86.
Click the tab to display the page:
Setting Preset Points on page 37)
(see Setting Tours on page 39)
Click the arrows to pan / tilt the camera according to the configured
speed on the sliders. The enclosed number indicates the currently
Drag the slider to adjust the pan speed; 1 (slowest) to 5 (fastest).
35
To Next Page
Loading...
Need help?
General
