LevelOne DSS-1000 - Managing Network Loss; Scheduling Network Loss Trigger

DSS-1000 User Manual
3.8 Managing Network Loss
When a camera suddenly disconnects from the network, DSS-1000 will trigger a network
loss notification by displaying a network loss icon and a beep sound.
By default, the trigger is enabled for 24 hours a day and 7 days a week. However, the
beep sound must be enabled and configured separately.
Scheduling Network Loss Trigger
1. On the Setup screen, click Schedule.
2. Select the camera from the camera list panel.
1
2
Item
Description
1
Event Handling

Event Handling: Enables event trigger.
Schedule

No Event Handling: Disables event trigger.
2
Time Table
Shows green cell if event trigger is enabled and gray cell if
event trigger is disabled.
3. Select either Event Handling or No Event Handling.
120