76
overwrite options. The overwrite options specify whether to overwrite the target with the files of the
same names.
Step 4 is for confirmation, showing the brief information of the task settings.
Distributing File Updates to Multiple Sites
Two or more NAS server are required, one as the SmartSync server, others as the SmartSync clients.
It will replicate data from the SmartSync server to the SmartSync client.
On the NAS server which acts as the SmartSync server, create a sync point of “Distribute” mode,
which distributes data to the SmartSync clients as they request.
To create a sync point, please go to the Backup→SmartSync →Server menu on the
Administration Page. Click the Add button to open the page below. On the page you should provide
the sync point name and specify which group is allowed to request data from this sync point. Set the
mode to “Distribute”.
On the NAS server which acts as the SmartSync client, set up a SmartSync task, which defines the
schedule settings and the target folder.
To set up a SmartSync task, please go to the Backup→SmartSync →Task menu on the
Administration Page. Click the Add Task button.
Follow the steps to take to add the SmartSync task.
Step 1 is to specify the IP address of the SmartSync server.
Step 2 is to choose a sync point of “Distribute” mode in the SmartSync server. Please also provide a
user account with the privilege to request data from the sync point.
To Next Page
Loading...
