Why are blank pages feeding into the output bin of my Lexmark C920 Printer?
Blank pages may feed if an incorrect media type is loaded in the tray. Load the correct type media for your print job, or change the Paper Type setting to match the type of media loaded.
How to resolve consistent misfeeds or jams in Lexmark Printer feeder?
To address consistent misfeeds or jams, flex the paper and turn the print media over. Also, ensure the feeder is properly installed, paper is loaded correctly and is not damaged, paper meets specifications, and guides are positioned correctly for the paper size selected.
What to do if the Lexmark C920 operator panel display is blank?
If the operator panel display is blank or shows only diamonds, it could indicate a failed self-test. Turn the printer off, wait 10 seconds, and turn it back on. If the 'Performing Self Test' and 'Ready' messages do not appear, turn the printer off and call for service.
How to fix incorrect characters printing on my Lexmark C920?
If incorrect characters are printing, and you are using a parallel interface, ensure you are using an IEEE 1284-compliant parallel cable. If 'Ready Hex' appears on the display, the printer is in Hex Trace mode. Turn the printer off and back on to exit Hex Trace mode.
What to check if the paper tray does not raise or lower correctly on my Lexmark Printer?
Check the following: the printer is properly attached to the high capacity feeder, the printer is powered on, the power cord is plugged firmly into the back of the high capacity feeder, the power cord is plugged into an outlet, and the outlet has power.
What to do if colored lines appear on printed page from Lexmark C920 Printer?
If colored lines, streaks, or smudges appear on the printed page, or the print appears blurred or unclear when using your Lexmark Printer, replace the photodevelopers. If the problem only occurs when printing black, replace just the black photodeveloper and fuser coating roll. If the problem occurs when printing one of the colors, replace all three of the color photodevelopers.
How to improve transparency quality on Lexmark C920?
To improve the quality of printed transparencies from your Lexmark Printer, make sure you’re using recommended Lexmark transparencies. Ensure you have selected the correct paper weight setting for the media and set the Paper Type to Transparency. Avoid getting fingerprints on the transparencies before printing.
What to do if my Lexmark C920 Printer prints blank pages?
If blank pages are feeding into the output bin, an incorrect media type may be loaded in the tray being printed from. Load the correct type of media for your print job, or change the Paper Type setting to match the type of media loaded.
What to do if held jobs do not print on my Lexmark C920 Printer?
If held jobs do not print, a formatting error may have occurred, or the printer has received invalid data. You can try to print the job (only part of the job may print) or delete the job.
What to do if my Lexmark Printer frequently jams?
Frequent paper jams may occur if you are using paper that does not meet the printer specifications. Use recommended paper and other specialty media. Ensure that the stack of paper you load does not exceed the maximum stack height indicated in the tray or on the multipurpose feeder. Make sure the guides in the selected tray are set to the appropriate position for the size paper loaded. High humidity may cause the paper to absorb moisture. Load paper from a fresh package and store paper in its original wrapper until you load it.
To Next Page
General
