Lexmark X422 - Page 172

Menus
172
Using the MFP control panel and menus
Collate To keep the pages of a print
job stacked in sequence
when making multiple
copies of the job.
On* Copies the entire job the number of times
specified. For example, if you set Copies
to 2 and have three pages to copy, the
MFP output is page 1, page 2, page 3,
page 1, page 2, page 3.
Off Copies each page of a job the number of
times specified. For example, if you set
Copies to 2 and have three pages to copy,
the MFP output is page 1, page 1, page 2,
page 2, page 3, page 3.
Original Size Provides a list of possible
scanner sizes to select
from to specify the size of
your original copy
document.
• Letter*
• Legal
• Executive
• Folio
• Statement
• A4*
• A5
• JIS B5
(* Denotes a country/region-specific
factory default value)
Copy To Source Provides a list of possible
print media sources to send
the copy job to for printing.
• Tray 1*
• MP Feeder
• Tray 2
Tray 2 is not listed as a selection in the
values list unless an optional 250- or
500-sheet drawer is installed.
Darkness Specifies the level of
darkness for the copy job.
1–9 (5*)
Number of
Copies
Specifies the number of
copies for the copy job.
1–999 (1*)
Overlay Specifies the selection for
overlay text to print on each
page of the copy job.
The overlay looks similar to
the following on a page:
Confidential
Copy
Draft
Urgent
Custom
Off*
Note: The Custom value is not shown
unless text is entered into the Custom
Overlay text field from the Web page. The
text used for the overlay is what you
entered on the Web page, but you still
select Custom in the menu.
Allow priority
copies
Lets you interrupt a
network print job, so you
can use the MFP as a
copier to copy a page or
document.
On* Interrupts the print job at the next page.
Off Interrupts the print job at the next job
boundary which means between incoming
individual print jobs.
Defaults Menu – Copy Settings(continued)
Menu item Purpose Values and descriptions
C
o
n
f
i
d
e
n
t
i
a
l